Clipex fencing solution. These revolutionary posts will save you time, money and give you a fence that will have a service life in excess of 30 years. Clipex systems are much faster to erect, stronger and more cost effective than other forms of fencing in the market. They have been tried, tested and have succeeded in the Australasian market since 2007.
Time is the most valuable resource we have; Clipex posts are guaranteed to give you more of it. Fencing can be erected in half and in some cases a third of the time of traditional fencing methods.
Clipex posts use a new, stronger strength to weight design. They are made with min. 450-grade high tensile steel, whilst keeping great elongation properties. All our Clipex posts feature a backing plate at ground level, to give the posts strength where it matters most.
Clipex’s unique Dacromet clip saves hours stapling and requires less time bent down fixing bottom wires. The unique Clipex post design drives into almost any soil type with ease.
All Eco, Standard and Beefy posts come with a ground level strengthening plate and below ground anti-lift plate. The anti-lift plate acts like a barbed hook anchor, which strengthens the fence over undulating ground and also once installed acts as a deterrent from opportunistic thieves. Security brackets can be retro fitted for additional security if required.
Once the X™ fence® wire is clipped in place it is very difficult to release the tensioned fence. Security and peace of mind, once installed it is there to perform for a very long time.
The lightweight yet high tensile strength of Clipex make’s it a much more manageable product to handle and erect especially in challenging terrain. Combining Clipex posts with X™ fence® wire netting, enables posts to be spaced further apart without compromising the effectiveness or strength of the fence. This also reduces the need to purchase extra posts, which in turn reduces labour and machinery costs.
Stainless steel pins and a Dacromet® clip make Clipex stronger than traditional staple fixing. The pins are riveted in with a 10 tonne press, so there are no fiddly parts to come loose or get lost. These simple clips eradicate the need for staples therefore providing a strong wire connection every time. The clip sits well inside the perimeter of the post, so there’s no chance of them being damaged when using a post driver. Each post has an automated weld at the top to guarantee that the post won’t split when being driven with pneumatic drivers into hard ground.
All fences require maintenance in their life. Clipex fencing reduces this maintenance drastically. The Clipex fence solution retains the wire but does not restrict it, allowing the wire to take the strain. Should your wire need to be restrained it’s a simple matter of un-clipping, straining and then re-clipping. You can easily replace any damaged sections of fence just as easily as when you installed them. Clipex post can also be used in an emergency quick fix or to bolster up failing fences.
What goes up must come down! Eventually your fences will need to be replaced or pulled down. Hopefully that’s a long time away, but when the time comes all the wires can be easily salvaged and rolled up, leaving the posts standing which can be used again or pulled up and used elsewhere.
To find out more about Clipex fencing contact Sam today.